External Webinar | Michael Wen | 2022.12.15
EN 15194:2017 & DIN 79010-2020
EN 15194
适用范围
Training | SGS | 2022
1
范围
This European Standard applies to EPAC bicycles for private and commercial use with exception of EPAC
intended for hire from unattended station.
私人和商业用途
This European Standard is intended to cover electrically power assisted bicycles of a type which have a
maximum continuous rated power of 0,25 kW, of which the output is progressively reduced and finally cut
off as the EPAC reaches a speed of 25 km/h, or sooner, if the cyclist stops pedalling.
最大持续输出功率不大于0.25kW, 最大助力速度25 km/h
This European Standard specifies requirements and test methods for engine power management
systems, electrical circuits including the charging system for the design and assembly of electrically
power assisted bicycles and sub-assemblies for systems having a rated voltage up to and including 48 V
d.c. or integrated battery charger with a nominal 230 V a.c. input.
电池电压不大于48 V d.c. 或 配置230 V a.c.的一体式充电器
This European Standard applies to EPAC bicycles that have a maximum saddle height of 635 mm or
more and that are intended for use on public roads.
座高大于635mm
EN 15194
标准构成
Training | SGS | 2022
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
• 4.1 General
一般要求
• 4.2
Electrical requirements
电气要求
• 4.3
Mechanical requirements
机械安全要求
• 4.4 List of significant hazards
重大危险列表
5 Marking, labelling
标签和标识
6 Instruction for use
说明书
机械要求
Training | SGS | 2022
机械要求
Training | SGS | 2022
EPAC
的机械要求
vs.
常规自行车机械要求
EN 15194
Clause 4.3.1 – 4.3.16
vs.
ISO 4210-2
ISO 4210-3
ISO 4210-4
ISO 4210-5
ISO 4210-6
ISO 4210-7
ISO 4210-8
ISO 4210-9
一般要求
一般测试方法
刹车
转向系统
车架前叉
车轮和轮圈
脚踏和驱动系统
鞍座和鞍管